■ Hands Free
Testing ■ Exact and Safe Positioning ■ Stepless 3D-Clamping System ■ Single Hand Fastening
Model number
Explanation
MSU1500
3D probe positioner (steel base)
with case
MSU1500 tip
MSA100
(for PMK probe only)
3D probe positioner (steel base)
*Case not included.
Dedicated
to PMK probe
MSA100 tip
MSU1500
MSA100
Mountable diameter: 5 to 17
mmArm length: 200 mm
Fixed method: 1.2 kg Steel base
Mountable diameter: 9 mm, 11
mmArm length: 200 mm
Fixed method: 1.2 kg Steel base
MSB40
MSC85
Mountable diameter: 9 mm, 11
mmArm length: 200 mm
Fixing method: Table clamp
Mountable diameter: 9 mm, 11
mmArm length: 200 mm
Fixing method: Vacuum
MSM130
MSM200
Mountable diameter: 9 mm, 11
mmArm length: 130 mm
Fixed method: Magnet
Mountable diameter: 9 mm, 11
mmArm length: 200 mm
Fixed method: Magnet
Outline drawing MSU1500
SKID®
SKID® is a unique platform designed to satisfy all sorts of
different demands on PCBA testing and debugging in
one single item.
It offers a modular design, which enables the user to expand the SKID according
to his needs.
The frame is available in three versions: SKID S offers a clamping
width of at least 160x160 mm, which fits the 3U standard PCB form factor, SKID
M for 6U cards and SKID L with a clamping width of 300 x 340 mm.
Of course smaller boards can be tested as well. The PCBA spacers can be positioned to clamp most
geometrical forms; even inconvenient non-standard shapes, that are usually hard
to clamp.
The PCBA resides 10 mm above the frame, offering a
better accessibility to the dut and the SKID itself
stands on 90 mm pedestals, enabling access from top- and bottom-side simultaneously.
Standard M6 threads are all around the frame to mount equipment, such as probe
positioners, lamps or other accessories.
Depending on its configuration, SKID can be used for environmental testing in
climate chambers for
temperatures of -55 to +150 °C .
Example of combination with printed circuit board fixing
jig SKID
It is a
jig to fix the printed circuit board and the probe. You can choose
from three sizes.
Wearing short type legs
Wearing long type legs
When used vertically
-55ºC to 155ºC SKID-PCBA Frame
Main unit, accessories, order information
Model number / (Order number)
appearance
Content
MSU 1500
(893-350-006)
Mountable diameter: 5 to 17 mmArm
length: 200 mm
Fixed method: 1.2 kg Steel base
MSA 100
(893-350-001)
Mountable diameter: 9 mm, 11 mmArm length: 200 mm
Fixed method: 1.2 kg Steel base
MSB 40
(893-350-002)
Wearable diameter: 9 mm, 11 mmArm length: 200 mm
Fixing method: Table clamp
MSC 85
(893-350-003)
Mountable diameter: 9 mm, 11 mmArm length: 200 mm
Fixing method: Vacuum
MSM 130
(893-350-004)
Mountable diameter: 9 mm, 11 mmArm length: 130 mm
Fixed method: Magnet
MSM 200
(893-350-005)
Mountable diameter: 9 mm, 11 mmArm length: 200 mm
Fixed method: Magnet
STS 100
(893-100-001)
1.2kg steel base (Φ100mm)
TIK 40
(893-100-002)
Table clamp width 40mm
VAS 85
(893-100-003)
Vacuum type (Φ85mm)
TM 170
(893-100-004)
Magnet type (Φ30mm)
Holding power: 170N
TM 170
(893-100-005)
Magnet type (Φ30mm)
Holding power: 300N
STV 130
(893-200-130)
Length: 130mm
Temperature resistance range: -40ºC to +85ºC
STV 130v2a
(893-200-13V)
Length: 130mm
Temperature resistance range: -55ºC to +150ºC
STV 200
(893-200-200)
Length: 200mm
Temperature resistance range: -40ºC to +85ºC
STV 200v2a
(893-200-20V)
Length: 200mm
Temperature resistance range: -55ºC to +150ºC
HAL 512
(893-050-000)
Wearable diameter: 9 mm, 11 mm
UNIHOLD
(893-090-000)
Wearable diameter: 5 to 17 mm
Temperature resistance range: -55ºC to +150ºC
TWINHOLD
(890-880-104)
Two probes can be installed at the same time
TWA-2xM6
(893-010-000)
Two "HAL 512" or "UNI HOLD" can be connected
GAD M86
(893-000-M86)
No image
-
GAD 1/4""M6
(893-000-MI6)
No image
-
ESCH-SW7
(893-000-SW7)
No image
-
SKID S
(893-500-000)
Size: 160mmx160mm
Height: 20mm, 100mm
SKID M
(893-500-010)
Size: 160mmx240mm
Height: 20mm, 100mm
SKID L
(893-500-020)
Size: 300mmx340mm
Height: 20mm, 100mm
"Arm for probe poled" that is convenient to
combine
